Ford 2015 Fiesta Instrukcja Użytkownika Pobierz pdf (Strona 74)

2. Close the window a third time to the

point of resistance. You disabled the

bounce-back feature and you can now

close the window manually. The

window travels past the point of

resistance and you can close it fully.

Contact an authorized dealer as soon as

possible if the window does not close after

the third attempt.

Resetting the Bounce-Back Feature

WARNING

The bounce-back feature remains

turned off until you reset the

memory.

If you have disconnected the battery, you

must reset the bounce-back memory

separately for each window.

1. Lift and hold the control until the

window is fully closed.

2. Release the control.

3. Lift and hold the control again for a few

seconds.

4. Release the control.

5. Lift and hold the control again for a few

seconds.

6. Release the control.

7. Press and hold the control until the

window is fully open.

8. Lift and hold the control until the

window is fully closed.

9. Release the control.

10. Open the window and then try to

close it automatically.

11. Repeat the procedure if the window

does not close automatically.

Accessory Delay (If Equipped)

You can use the window controls for

several minutes after switching off the

ignition or until opening either front door.

GLOBAL OPENING AND

CLOSING

You can also operate the power windows

with the ignition off using the global

opening and global closing function.

Note: Global opening will only operate for

a short period of time after you have

unlocked your vehicle using the remote

control.

Note: Global closing will only operate if you

have set the memory correctly for each

window. See Power Windows (page 70).

Global Opening (If Equipped)

E71955

To open all the windows:

1. Press and release the remote control

unlock button.

2. Press and hold the remote control

unlock button for at least three

seconds.

71

Fiesta (CCT), enUSA, Second Printing

Windows and Mirrors

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 422 423

Komentarze do niniejszej Instrukcji

Brak uwag