Ford 2001 Lincoln Town Car Instrukcja Użytkownika Pobierz pdf (Strona 218)

WINDSHIELD WASHER FLUID

Washer fluid

Check the washer fluid whenever

you stop for fuel. The reservoir is

highlighted with a

symbol.

If the level is low, add enough fluid

to fill the reservoir. In very cold

weather, do not fill the reservoir all

the way.

Only use a washer fluid that meets Ford specification . Refer to

Lubricant specifications in the Capacities and specifications chapter.

State or local regulations on volatile organic compounds may restrict the

use of methanol, a common windshield washer antifreeze additive.

Washer fluids containing non-methanol antifreeze agents should be used

only if they provide cold weather protection without damaging the

vehicle’s paint finish, wiper blades or washer system.

Do not put washer fluid in the engine coolant reservoir. Washer

fluid placed in the cooling system may harm engine and cooling

system components.

ENGINE COOLANT

Checking engine coolant

The concentration and level of engine coolant should be checked at the

mileage intervals listed in the scheduled maintenance guide. The coolant

concentration should be maintained at 50/50 coolant and water, which

equates to a freeze point of -36° C (-34° F). Coolant concentration

testing is possible with a hydrometer or antifreeze tester (such as the

Rotunda Battery and Antifreeze Tester, 014–R1060). The level of coolant

should be maintained at the “cold full” of “cold fill range” level in the

coolant reservoir. If the level falls below, add coolant per the instructions

in the Adding Engine Coolant section.

Maintenance and care

218

1 2 ... 213 214 215 216 217 218 219 220 221 222 223 ... 295 296

Brak uwag

Ford 2001 Lincoln Town Car Instrukcja Użytkownika Strona 218