Ford 2001 Lincoln Town Car Instrukcja Użytkownika Pobierz pdf (Strona 251)

10. Install bulb retaining ring over the plastic base and lock the ring into

the socket by turning it clockwise until you feel a “stop.”

11. Connect the electrical connector into the plastic base until it “snaps.”

12. Straighten alignment pins,

making them parallel with the outer

edges of the attachment standoff.

13. Carefully insert the headlamp

assembly into the vehicle making

sure the alignment pins are inserted

into the proper holes and into the

guide ribs.

14. Hold the headlamp assembly

snugly against the vehicle and push down on the clips to lock the lamp

into place.

Replacing front parking lamp/turn signal bulbs

1. Remove screw from the lamp

assembly.

2. Disengage lamp assembly (it has

a snap fit) by pulling straight

forward.

3. Remove bulb socket from the

parking lamp assembly by turning it

counterclockwise.

4. Pull bulb straight out of socket

and press in the new bulb.

5. Install the bulb socket into the

lamp assembly by turning clockwise.

Maintenance and care

251

1 2 ... 246 247 248 249 250 251 252 253 254 255 256 ... 295 296

Brak uwag

Ford 2001 Lincoln Town Car Instrukcja Użytkownika Strona 251