Ford 2001 Lincoln Town Car Instrukcja Użytkownika Pobierz pdf (Strona 252)

6. Align top and bottom ribs of

parking lamp assembly with

corresponding slots on front of

vehicle.

7. Push gently until parking lamp

assembly seats (you will hear a

snap).

8. Install screw on lamp assembly.

Replacing tail/brake/turn signal/backup lamp bulbs

The tail/brake/turn signal and

backup lamp bulbs are located in

the tail lamp assembly, one just

below the other. Follow the same

steps to replace either bulb:

1. If equipped, remove tail lamp

covers.

2. Open the liftgate to expose the

lamp assembly screws.

3. Remove the two bolts from the

tail lamp assembly.

4. Carefully pull the lamp assembly

from the tailgate pillar to disengage two hidden snap-in retainers. (Flare

side and Super Crewtail lamps are not equipped with snap-in retainers.)

5. Remove bulb socket from the lamp assembly by turning it

counterclockwise.

6. Pull bulb straight out of socket and press in the new bulb.

7. Install the bulb socket into the lamp assembly by turning clockwise.

8. Carefully install the tail lamp assembly on tailgate pillar snapping the

two snap-in retainers into place. (Flare side and Super Crewtail lamps do

not snap into place but have two tabs which fit into slots.)

9. Secure the tail lamp on the vehicle with two bolts.

Maintenance and care

252

1 2 ... 247 248 249 250 251 252 253 254 255 256 257 ... 295 296

Brak uwag

Ford 2001 Lincoln Town Car Instrukcja Użytkownika Strona 252